![]() These are not detailed instructions, just high-level summary items to help you with the details that are based on your specific wifi router.If you don’t find what you’re looking for, just contact us using the contact-us page or email access tips using toe local OS WiFi To connect it to your home router again. Wait 20 seconds or so, and then you should be able to connect. Start the setup/installation process over and make sure your WiFi password is correct. If LED4 never lights, then the system has not or can not connect to your home Wifi.Landscaper or Local Open Sprinkler WiFi mode may be enabled Press Butto B4 and wait for LED4 to be lit indicating connection switched back to your Home WiFi again.Then choose the lower right menu, select other options, and reset the WiFi settings to start over.Connect to your WiFi network and use the app to Reset the WiFi settings by connecting to your home WiFi and open the app.If LED4 is on, the system has already been set up on a home WiFi network. WiFi List is not showing up when the browser address is 192.168.4.1:.Note that we ask buyers to let us know before we ship it □ If you want your timer modified to use the sensor wires directly, let us know before you purchase it, or if you send it back, we can make the proper connections and ship it back. ![]() Refer to the rain sensor wiring instructions for more information. You can re-wire your rain sensor to work without it being connected to the sen terminals.If you have trouble, please contact us, not openSprinkler. Automatic Weather adjustments can be achieved using instructions here.Since the RD-Wireless covers the numbers on the top row, it’s easy to get confused. This is actually a ground terminal on most backboards, not the 7th station terminal. Usually caused because station 7 is thought to be the first terminal on the top row.2) in your programs Edit Programs -> check the box “Use Weather Adjustment” After selecting the WiFi and entering a password, the timer should reboot and indicate your new WiFi connection by illuminating LED4 in Weather and Sensors page.You can also type in the WiFi SSID name manually and connect.If you can’t see your WiFi on the list or the list is too long, disconnect and reconnect your phone from the OS network to update the list.After you connect the timer to your WiFi network, make sure to reconnect your phone to the same WiFi network.Close the app and re-open the app after any change.Key things to do while debugging connection issues: “Scan for device” does not detect the timer. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |